If you’re a professional mechanic or car technician—or just someone who loves to handle cars yourself—you know that car lifts are one of the most valuable tools in your garage.
From two-post lifts designed for general maintenance to scissor lifts ideal for tight, low-ceiling spaces, a lift gives you safer, easier access to the underbody of your vehicle for everything from routine oil changes to transmission overhauls.
But that safety starts with choosing a high-quality lift. A poorly made lift isn’t just inconvenient—it’s a serious safety risk. That’s why we’ve rounded up the best 2-post, 4-post, alignment, scissor, parking, portable, and mobile column car lifts. Whether you need a space-saving home garage solution or a heavy-duty setup for commercial use, this guide covers the top models trusted by pros—each one backed by expert approval, built for durability, and eligible for free shipping and our price-match guarantee.
Let’s get your vehicle up in the air the right way.
What is a car lift?
Car lifts, also known as vehicle lifts, raise vehicles off the ground to access the vehicles’ undercarriage. They’re used for car maintenance and repairs like replacing spark plugs, oil changes, tire rotation, and brake pad replacement.
Best two-post car lifts
Two-post car lifts have two posts on either side of the vehicle with arms that attach to the car’s frame. The two vertical posts support a platform or carriage that lifts the vehicle. Most two-post lifts operate using a hydraulic system to raise and lower the vehicle and can accommodate a range of vehicle sizes. You’ll typically find them in auto repair shops.
1. BendPak 10AP Two-Post Lift
BendPak 10AP two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top-of-the-line materials, a design that’s ahead of its time, and a 10,000-lb. lifting capacity.
The lift offers the convenience of wide or narrow installation wrapped up into one configurable package. It’s a durable, safe, and reliable car lift that features an expandable top beam and Bi-Metric™ arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric.
Its simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity.
Features:
- Automatic arm restraint system
- Triple-telescoping nested swing arm design
- Low-profile arms
- Double-telescoping screw adapters feature gouge and tear-resistant polyurethane pads
- Automatic safety lock system
- Bi-metric™ adaptable swing arms
- Durable powder coat finish
- Expandable top beam accommodates wide or narrow drive-thru configurations
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Exclusive Bi-Metric™ arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53″ & 59″ tall carriages for superior strength and durability
- Electric/hydraulic HVLP power system
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Automatic arm restraints withstand over 2000 pounds of side force
- 3/8″(10mm) High-strength multi-strand galvanized steel equalizing cable
- Oversized cable sheave diameter reduces cable fatigue
- Four triple-telescoping arms
- ALI certified
Requirements:
- Electricity and utility
- Minimum floor requirements
Specifications:
- Lifting capacity: 10,000 lbs. (4,536 kg)
- Height overall: 145″ (3,683 mm)
- Width overall: 135″ (3,429 mm) or 145″ (3,683 mm)
- Outside columns: 127″ (3,226 mm) or 137″ (3,480 mm)
- Inside columns: 108.25″ (2,750 mm) or 118.25″ (3,004 mm)
- Drive-thru clearance: 92″ (2,337 mm) or 102″ (2,591 mm)
- Floor to overhead switch: 139.25″ (3,537 mm)
- Time to full rise: 45 seconds
- Max load per arm: 2,500 lbs. (1,134 kg)
- Noise <70 dB
2. MaxJax M7K
MaxJax M7K offers a portable two-post system that works with hydraulics. It provides under-car clearance and unobstructed floor space, allowing people to access engine undersides, transmissions, drive shafts, and anything else requiring under-car access.
MaxJax M7K is portable, enabling users to position it in an optimal area to ensure plenty of space. It comes with built-in wheels that allow users to use the lift when needed and conveniently store it out of the way when not in use, keeping garages and vehicle lanes clutter-free. The lift also has internally threaded recessed drop-in anchors and quick-connect/disconnect hydraulic couplers that provide for fast and simple set-up.
Features:
- Clear undercar access
- Built-in wheels
- Recessed drop-in anchors
- Connect/disconnect hydraulic couplers
- Cast iron gear flow divider
- Mobile power unit cart
- Adjustable lifting arms and stackable adapters
- Low-profile arms
- Automatic arm restraints
- Polyethylene load bearings
- Single-piece columns
- Direct drive cylinders
- Hydraulic cylinders
- Two lifts in one
Requirements:
- Hydraulic oil
Specifications:
- Capacity: 3.175kg
- Weight: 350kg
- Dimensions: 170 x 70 x 60 cm
3. Challenger CL10V3
Challenger CL10V3 has a three-stage front and three-stage rear arms that allow people to do repairs on vehicles without shuffling the vehicle back and forth. The lift rises between 17 to 27 seconds and has adjustable height and width. It also comes with additional accessories for added functionality.
Features:
- Versymmetric® offset front arms
- Oversized 5 in. diameter pulley and heavy-duty 5/16 in. cable
- 48 in. elongated carriage design
- Three width adjustments and two height adjustments
- Additional 2-foot or 3-foot extensions
- Padded overhead shut-off system
- Premium double telescoping screw pads
- Fully gusseted base plate design
- Pulley-less jacketed single-point lock release system
- Standard dual-integrated rubber door guards
- Plated arm restraints and arm pins
- Premium powder coat finish
Requirements:
- Indoor installation only
- Electrical requirements
- Concrete flooring
- Tools requirements
Specifications:
- Lifting capacity: 10,000 lbs
- Lift configuration: Standard
- Arms: 3-stage front/3-stage rear
- Rise height: 74.125
- Overall height: 11′ 2″ or 11′ 8″
- Overall height (cylinder extended): 11’ 11”
- 2’ height extension available: Yes
- 3’ height extension available: Yes
- Overall width: 11′ 6.5″ / 12′ .5″ / 12′ 6.5″
- Drive-thru clearance: 100″ / 106″ / 112″
- Floor to overhead switch: 10′ 8.5″ – 11′ 2.5″
- Front arm reach: 20” – 42”
- Rear arm reach: 37.625” – 60”
- Screw pad height: 3.875” – 6.125”
- Inside columns: 110″ / 116″ / 122″
- Motor/voltage: 2HP, 208v-230v, 60Hz, 1Ph
- Speed of rise: 38 s
- Ceiling height required: 12’
- Ali/etl certified: Yes
- Colors available: Red, blue, black
Best four-post car lifts
Four-post car lifts typically have four vertical posts anchored to the floor. The posts are connected to a horizontal runway or platform for the vehicle to drive on. They are usually used in residential garages and are great for storing vehicles in garages with limited space.
BendPak HD-9XW
BendPak HD-9XW is a standard-width, extra-tall lift that offers ample overhead clearance and enough side room to park light-duty trucks, SUVs, and virtually all low ground-clearance vehicles. This model comfortably holds wide-body trucks and SUVs without people having to worry about scratching up the mirrors or doors.
With 82” of rise out of the runways, users can lift those heavy machines higher, leaving more room for taller mechanics to operate underneath. There’s also more room to park high-clearance trucks and SUVs. This eliminates the disappointment of buying a new lift and discovering that a taller vehicle won’t fit underneath.
Features:
- Slack-cable locks
- Single-point lock release
- Non-slip runways
- Magnificent powder coat finishing
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Electric-hydraulic power system
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
Requirements:
- Electrical and utility
- Minimum floor requirements
Specifications:
- Lifting capacity: 9,000 lbs. (4,082 kg)
- Time to full rise: 50 seconds
- Overall width: 110.25″ (2,800 mm)
- Outside length: 198″ (5,029 mm)
- Overall length: 224.5″ (5,702 mm)
- Height of columns: 100.25″ (2,546 mm)
- Width between columns: 100.25″ (2,546 mm)
- Drive-thru clearance: 86.5″ (2,197 mm)
- Locking positions: 17
- Lock spacing: Every 4″ (102 mm)
- Motor: 220 VAC / 60 Hz / 1Ph
- Noise: 45 dB
- Weight: 1,778 lbs. (806 kg)
- Dimensions: 191″ x 22″ x 28″ (4,851 mm x 558 mm x 711 mm)
BendPak HDS-14X
BendPak HDS-14X “limo style” lift is useful for vehicles that make use of its 229″ runways. Limousines, heavy-duty SUVs, and trucks need the extra length, and that’s where this heavy-duty four-post lift comes in handy. The front-to-back clearance ensures the longest vehicles can make it over or under the lift with ease.
The HDS-14X is an ideal four-post lift for commercial shops looking to expand their service abilities. The runways are extended 30″ more than our standard-length model to a whopping 229″. The extended approach ramps provide a safe, gradual climb, and an ample 70″ rise permits most mechanics to stand upright to perform oil changes, exhaust service, wheel service, and every other undercarriage activity.
Features:
- Super long 229” runways
- Dual hub cable sheaves
- Large base plates
- Spring-loaded safety locks
- Secondary lock system
- Longer approach ramps
- RJ7W rolling bridge jack
Requirements:
- Electrical and utility
- Minimum floor requirements
Specifications:
- Lifting capacity: 14,000 lbs. (6,350 kg)
- Max capacity / front axle: 7,000 lbs. (3,175 kg)
- Max capacity / rear axle: 7,000 lbs. (3,175 kg)
- Min. runway height: 7.5″ (191 mm)
- Max. rise: 70″ (1,778 mm)
- Max. lifting height: 77.5″ (1,969 mm)
- Time to full rise: 60 seconds
- Overall width: 130″ (3,302 mm)
- Outside length: 243″ (6,172 mm)
- Overall length: 272″ (6,908 mm)
- Height of columns: 92″ (2,337 mm)
- Locking positions: 15
- Lock spacing: Every 4″ (102 mm)
- Motor: 220 VAC / 60 Hz / 1Ph
- Noise: 45 dB
- Weight: 2,740 lbs. (1,242 kg)
- Dimensions: 239″ x 22″ x 29″ (6,070 mm x 558 mm x 737 mm)
Rotary Solutions CR14
Rotary Solutions CR14 features a 79” rise height, which provides technicians with better vehicle service access. It also has multi-lock components, heavy-duty cable, and sheaves concealed under the runway.
Features:
- Self-choking ramps
- Multi-position lock cables
- Cable and sheave system
Requirements:
- Unavailable
Specifications:
- Capacity: 14,000 lbs (6350 kg)14,000 lbs (6352kg)
- Rise: 78-3/4″ (2000mm)
- Maximum wheelbase: 215″ (5460mm)
- Overall length: 250″ (6350mm)283″ (7188mm)
- Overall width: 131-3/4″ (3568mm)
- Width inside columns: 116-1/4″ (2953mm)
- Length between columns: 195-1/4″ (4946mm)
- Overall height: 90-1/2″ (2299 mm)
- Runway width: 20″ (508mm)
- Runway height: 7″ (178mm)
- Width between runways: 43″ (1092mm) or 46″ (1168mm)
- Rise time: 72 seconds
- Voltage: 208/230v208/230v
- Motor: 2HP2HP
- Minimum bay size: 15′ x 25′ (4572 x 7620mm)15′ x 28′ (4572 x 8534mm)
Best alignment lifts
Alignment lifts are specially designed to hold vehicles precisely while doing wheel alignment procedures. They provide accurate and stable positioning for measuring and adjusting wheel angles.
BendPak HDSO-14P
Bendpak HDSO-14P offers an open front design that is extremely helpful when performing wheel alignments. It features a clear entry upfront, providing easy vehicle access. A generous 14,000-lb. lifting capacity and extended runways allow people to service a wide variety of vehicles, from small cars to full-size trucks.
The lift comes without a front crossbar, so operators can easily enter and exit from beneath the vehicle, making the process of front-end adjustments quick and trouble-free. This model is great for busy alignment bays.
Features:
- Open front design
- Adjustable front outrigger tubes
- Oversize dual hub cable sheaves
- Four heavy-duty stainless steel lifting cables
- Hydraulic cylinder
- Multi-level locking positions
- Heavy-duty aircraft cable
- Electric hydraulic power system
- Large base plates
- Integrated hydraulic flow
- Automatic safely locks
- Capacity rolling jacks
Requirements:
- Electrical and utility
- Minimum floor space requirements
Specifications:
- Lifting capacity: 14,000 lbs. (6,350 kg)
- Max capacity / front axle: 7,000 lbs. (3,175 kg)
- Max capacity / rear axle: 7,000 lbs. (3,175 kg)
- Min. runway height: 7.75″ (197 mm)
- Max. rise: 70″ (1,778 mm)
- Max. lifting height: 77.5″ (1,968 mm)
- Time to full rise: 60 seconds
- Overall width (front): 143.25″ (3,639 mm)
- Overall width (rear): 130″ (3,302 mm)
- Outside length: 215.5″ (5,474 mm)
- Overall length: 244.5″ (6,210 mm)
- Locking positions: 15
- Lock spacing: Every 4″ (102 mm)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
- Weight: 3,238 lbs. (1,468.7 kg)
- Dimensions: 221″ x 22″ x 35″ (5,613 mm x 558 mm x 889 mm)
Atlas 414A Commercial Grade Four Post Alignment Lift
Atlas 414A is automotive equipment for commercial-grade alignments. It raises and lowers the lift using a cable system with an under-runway hydraulic cylinder and single-phase voltage. It also has slip plates and alignment turntables that can be set in different positions to accommodate various wheelbases.
Features:
- Built-in slip plates and alignment turntables
- Runway covers
- Air-operated single-point lock release
- Lock ladder design
- Double lock safety system
- Powder coat finish
- Steel approach ramps
- Additional drive-off ramps
- Mounting hardware
- 220 volt/1 phase electric operation
Requirements:
- External air supply
- Motor/electrical requirements
- Hydraulic oil
Specifications:
- Capacity: 14,000 lb.
- Lifting Height: 80″ (6′ 8″)
- Overall Width Of Columns (Without Motor): 130 7/8″ (10′ 10 7/8″)
- Overall Width Of Columns (With Motor): 138 7/8″ (11′ 6 7/8″)
- Overall Length With Approach Ramp: 255″ (21′ 3″)
- Length Between Columns: 197 1/4″ (16′ 5 1/4″)
- Runway Length: 208 5/8″ (17′ 4 5/8″)
- Runway Width: 20″
- Thickness Of Runway: 8 3/4″
- Width Between Runways: 46 7/8″ (w/ Rail 44 3/8″)
BendPak HDS-14LSXE
BendPak HDS-14LSXE lifts virtually all residential vehicles, from sedans to heavy-duty pick-up trucks to municipal vehicles and farming equipment. Its turn plates in the front and multi-caster slip plates in the back allow for perfectly precise, free-floating alignments.
The lift’s aluminum-alloy construction turn plates are easily positioned using BendPak’s turn plate pockets. They’re also lighter in construction and feature dual “popsicle gap stops” for better convenience. Angled steel lock pins conveniently hold the plate in place when people want to use the machine strictly as a maintenance or storage lift. Technicians can also convert the four-post into a fully functional wheel service lift.
Features:
- Extended length alignment lift
- Slip plates
- Deluxe aluminium alloy turnplates
- Dual hub cable sheaves
- Heavy-duty aircraft cable
- Built-in safety lock and adjustable locking positions
- Hydraulic flow restrictor
- Spring-loaded safety locks
- Push button pneumatic lock release
- Secondary lock design
- Electric hydraulic power system
- Longer approach ramps
- Flexible protective conduit
- Rolling bridge jacks
Requirements:
- Electrical and utility
Specifications:
- Lifting capacity: 14,000 lbs. (6,350 kg)
- Max capacity / front axle: 7,000 lbs. (3,175 kg)
- Max capacity / rear axle: 7,000 lbs. (3,175 kg)
- Min. runway height: 7.5″ (191 mm)
- Max. rise: 70″ (1,778 mm)
- Max. lifting height: 77.5″ (1,969 mm)
- Time to full rise: 60 seconds
- Overall width: 130″ (3,302 mm)
- Outside length: 243″ (6,172 mm)
- Overall length: 272″ (6,909 mm)
- Height of columns: 92″ (2,337 mm)
- Locking positions: 15
- Lock spacing: Every 4″ (102 mm)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
- Weight: 3,368 lbs. (1,527 kg)
- Dimensions: 239″ x 25″ x 33″ (6,071 mm x 635 mm x 838 mm)
Best scissor lifts
Scissor lifts use crisscross beams that operate like scissors. They move vertically, enabling the elevation of materials, workers, and tools to higher areas, enabling them to access areas that would normally be dangerous or difficult to reach.
BendPak LR-10000
BendPak LR-10000 is a good solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. It has convenient built-in storage trays that keep lug nuts and other small parts always within reach. Its small footprint, easy installation, and adaptable 220V power unit make the LR-10000 the perfect lift for any shop.
The lift platform and auxiliary adapters allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick-up points on most vehicles. The single-point safety release and dead-man-style operation controls make this lift easy to operate and safe to use.
Features:
- Low profile height
- Single-point safety release
- Dropped crossbar
- Rugged steel channel frame
- Industrial-grade hydraulic cylinder
Requirements:
- Unavailable
Specifications:
- Lifting capacity: 10,000 lbs. (4,545 kg)
- Max capacity / front axle: 5,000 lbs. (2,273 kg)
- Max capacity / rear axle: 5,000 lbs. (2,273 kg)
- Lifting height: 23″ (584 mm)
- Lifting height + Blocks: 32″ (813 mm)
- 1st lock: 14″ (356 mm)
- 2nd lock: 18″ (457 mm)
- 3rd lock: 20.75″ (527 mm)
- 4th lock: 22.75″ (578 mm)
- Overall pad length: 53″ (1,346 mm)
- Overall pad width: 24″ (610 mm)
- Overall length: 82.65″ (2,094 mm)
- Overall width: 85″ (2,159 mm)
- Lowered height: 4.5″ (114 mm)
- Lifting time: 35 seconds
- Motor: 208–230 VAC / 50–60 Hz / 1 Ph
- Weight: 1,332 lbs. (604 kg)
- Dimensions: 88″ x 85″ x 24″ (2,235 mm x 2,159 mm x 609 mm)
APlusLift Mid Rise Scissor Lift
APlusLift Mid-Rise Scissor Lift is a portable mid-rise scissor lift ideal for low-ceiling bays. It provides height for tire service, brakes, bodywork, and detailing. It has a hydraulic system with 150 percent load capacity and a triple roller design for added stability.
Features:
- Hydraulic cylinder
- Screw pads
- Manual lock release
- Portable dolly
Requirements:
- Hydraulic oil
Specifications:
- CE-certified lift structure and hydraulic system – tested for 115% dynamic load capacity and 150% static load capacity
- 55″ maximum lifting height with adjustable screw pads
- 88 9/16″ maximum length and 78 3/4″ maximum width
- One set of 2 3/4″ tall truck adapters included
- Dual 3 1/4″ hydraulic cylinder structure
- Triple roller design
Best parking lifts
Parking lifts are mechanical systems that support the efficient storage of multiple cars. They operate by moving vehicles on platforms to different levels, and their design maximizes parking space by vertically stacking vehicles. Most parking lifts use a hydraulic or electric system to operate.
BendPak HD-973PX
BendPak HD-973PX unique four-post parking lift design parks up to three vehicles in one space, instantly tripling your parking capacity, and providing room for the longest and boxiest vehicles.
The HD-973PX features independently operated lifting platforms, permitting varied vehicle heights and spacing in either upper or lower parking spaces. The platforms do not have to move in unison, so technicians can lower the bottom platform without disrupting the overhead vehicle being stored.
Features:
- Independent-operated lifting platforms
- Multi-position safety locks
- Hydraulic cylinder
- Fits three vehicles
- Weight-displacing base
Requirements:
- Electrical and utility
- Minimum floor requirements
Specifications:
- Style: Multi-level parking lift
- 7,000 lb. capacity upper deck
- 9,000 lb. capacity lower deck
- Shipping weight: 5,932 lbs. (2,691 kg)
AutoStacker A6S
AutoStacker A6S is a collapsible parking lift that increases the vehicle capacity of parking spaces. It is ideal for home and commercial use. It has an auto-synchronizing power system, operator controls, hidden hydraulic cylinders, and scissor structures that add to the lifting muscle of the tool.
Features:
- 1 A6S-OPT1-220V Scissor Lift
- 1 Power Unit and Power Unit Kit
- 1 A6S Parts Box
Specifications:
- Material: Steel
- Type Stance: Scissor lift
- Adjustable width at installation: False
- Height overall inches rounded: 91
- Overall width max inches rounded: 103.13
- Lifting capacity pounds: 6000
- Rise: 45 seconds
- Locking position quantity: 5
- Lock release type: Self-locking ratchet
- Platform length overall inches rounded: 141.25
Best mobile column car lifts
Mobile column car lifts are designed for heavy-duty lifting. Unlike fixed lifts, they are free-standing, which makes them portable and adjustable and allows people to raise vehicles without a fixed installation. They typically use screw drives or hydraulic cylinders to raise the vehicle.
BendPak PCL-18B
BendPak PCL-18B mobile column lift system comes in a set of 6. When combined, the system lifts to 108,000 lbs. It is ideal for three-axle vehicles, and each column is easy to stow away in minutes flat after the vehicle is lowered. All lifts are connected via a single control panel and can be stopped simultaneously with the push of a button. Sets of 2, 4, and 8 are available.
Features:
- Configurable up to 8 column lifts
- Single control panel connecting all lifts
- For a standard four-column set, just three 30′ cables are used leaving the front or back of the lift clear of cable obstructions
- Simple operation, long service life and minimum maintenance
- Intuitive controls allow the lift to be fully programmed and controlled from any column
- Control systems feature 24-volt safety circuitry
- The PLC and main system components are standard off-the-shelf brands rather than proprietary printed circuit boards or controls, which can be very expensive to service or replace
Specifications:
- Lifting capacity: 18,000 lbs. (8,165 kg)
- Overall height (raised): 101″ (2,565 mm)
- Overall height (lowered): 146.5″ (3,721 mm)
- Max. lifting height: 71.5″ (1,889 mm)
- Overall depth: 48.75″ (1,238 mm)
- Overall width: 45″ (1,143 mm)
- Chassis length: 32.25″ (819 mm)
- Min. lifting fork width: 9.5″ (241 mm)
- Max. lifting fork width: 35″ (889 mm)
- Lifting fork length: 11.5″ (292 mm)
- Turning circle: 40″ (1,016 mm)
- Lifting speed: 85 seconds
- Column weight: 1,450 lbs. (657 kg)
- Shipping weight: 1,450 lbs. (657 kg)
Challenger Lifts CLHM-MR20
Challenger Lift CLHM-MR20 is for vehicle servicing in low-ceiling shops and garages. It can fit in tight spaces and has built-in vehicle support that allows access to all parts of the car. The Challenger lift also has wheels for movement, allowing people to move it across different bays.
Features:
- Built-in vehicle support stands
- Portable design
Specifications:
- Lifting Capacity: 20,000 lb
- Lift Height: Min. Floor Level Max. 30″
- Power: Compressed air
- Maximum air pressure: 160 Psi
- Stroke: 30″
- Minimum Wheel Diameter (with adapters): 16″
- Minimum Wheel Diameter (without adapters): 19″
- Maximum Wheel Diameter: 44″
- Overall Width: 42 ¼”
- Overall Depth: 43 ¼”
Best portable car lifts
Portable car lifts are ideal for mobile mechanics, home garages, and workshops. They allow for easy set-up and transportation to different locations without needing a permanent installation. They can be used for many tasks, including routine maintenance, tire changes, and undercarriage inspections.
QuickJack 6000TL
QuickJack 6000TL delivers an upgraded 6,000 lbs. lifting capacity with a reliable 24-inch lift height. It has enhanced structural rigidity, and a new hydraulic power unit gives users faster, safer access to vehicles’ undercarriages, making it perfect for your home garage or track day. The redesigned electric/hydraulic power unit features a pressure-compensated flow divider, and both frames lift and lower in perfect sync.
It has reinforced structural elements—including thicker cross members, improved weld geometry, and upgraded pivot joints—to ensure rigidity and alignment under heavier loads. With a lift height of 24 inches, the QuickJack 6000TL gives ample clearance to handle nearly any vehicle maintenance task, without sacrificing the compact dimensions. It also comes with optional TL frame extension adapters, which technicians can use to extend the frames’ length, giving more flexibility with lift points.
Features:
- Factory pre assembled hydraulics
- Automatic safety locks
- One-handed operation and synchronized lifting
- Frame extensions and adapters
- Pivot joints
- Double urethane wheels
Requirements:
- Up to 3 liters of Automatic Transmission Fluid
- Air source to inflate air cylinders up to 50 PSI
- Assembly tools
Specifications:
- Lifting capacity: 6,000 lbs. (2,722 kg)
- Lowered height: A – With 2″ block: 3.5″ (89 mm)
- Lifting height: B – With 2″ block: 21″ (521 mm), C – With 3″ block: 22″ (546 mm), D – Max. height: 24″ (616 mm), E – With adapters: 24″ (597 mm), F – With adapters + pin: 26.75″ (673 mm)
- Lift point spread: G – Maximum: 60″ (1,524 mm), H – Minimum: 37″ (940 mm)
- Frame dimensions (ea.): I – Width: 11″ (278 mm), J – Length: 70″ (1,778 mm)
- Weight: 78 lbs. (35 kg)
- Time to full rise: 30 seconds
- Power unit weight: 15 lbs. (7 kg)
- Shipping dimensions (ea. frame): 73.5″ (L) x 15.25″ (W) x 5″ (H), (1,869 mm x 385 mm x 129 mm)
- Shipping weight: 240 lbs. (109 kg)
Visit QuickJack to learn more.
Choose the best car lift for your vehicle
When you’re working underneath a vehicle, safety isn’t optional—it’s everything. The right car lift not only gives you the access you need, it does it with the stability, strength, and features that let you work smarter and safer.
At Wrenchers, we stock only the professional-grade car lifts trusted by serious mechanics and garage pros. Whether you’re outfitting a home setup or a full-service shop, you’ll find the perfect fit from top brands like BendPak, MaxJax, and more. With over 150 lifts in our online catalog—including 2-post, 4-post, mobile column, scissor, and parking lifts—plus weight capacities from 7,000 lbs to 30,000+ lbs, we’ve got you covered for any job, any vehicle.
Explore car lifts at Wrenchers
Car lift FAQs
Is a 2-post or 4-post car lift better?
It depends on what you need the lift for. They both provide easy access to the underside of a car. However, a 2-post lift is a better option for versatility, cost, and space efficiency, especially for smaller shops. While a 4-post lift enables you to better service larger vehicles and do vehicle alignment.
Where are the best car lifts made?
The best car lifts are made across multiple locations. A great example is BendPak. BendPak lifts are designed and engineered in Agoura Hills, CA, and manufactured by BendPak-owned facilities overseas.
How thick of a slab for a car lift?
The recommended concrete thickness for a car lift is at least 4 inches. However, for safety and performance, especially with heavier lifts, a thicker slab of 6-8 inches is preferred.
What is the most versatile vehicle lift?
The most versatile vehicle lift is the 4-post lift, as it offers more stability and multiple uses, such as repairs, alignment, and tool storage.
